Omron C200HW-CLK21 Operation Manual page 98

Wiring
Note
Name
Optical Fiber Assembly
Tool
Optical Power Tester
Master Fiber Set
Optical Fiber Cables with Connectors (Indoor Use Only)
The following Optical Fiber Cables are available with Connectors already
attached.
Specifications
Optical Fiber Cable Connectors:
S3200-COCF2071
⇓
S3200-COCF2071
Optical Fiber Cable Connectors:
S3200-COCF2071
⇓
S3200-COCF2571
Optical Fiber Cable Connectors:
S3200-COCF2571
⇓
S3200-COCF2571
1. Consult a specialist tradesman if cables with outdoor specifications are re-
quired.
2. The cables listed above are black and have power supply lines and tension
members, although the power supply lines aren't used in the Controller
Link Network.
3. All of the cables listed above are attached to the connectors with adhesive.
4. Special training is required to assemble Optical Fiber Cables and connec-
tors with adhesive.
Optical Fiber Cable Accessories
Use the following accessories to assemble and test Optical Fiber Cables.
Model
CAK-0057 Crimp-cut tool for the S3200-COCF2071/2571 Con-
nectors
CAT-2700 With CAT-2702 Head Unit and adapter for the S3200-
COCF2071/2571 Connectors
CAT-2001H One meter cable for use with the CAT-2702 Head
Unit
This manual does not provide details on Optical Fiber Cable preparation. For
details, refer to the instructions provided with the CAK-0057 or the S3200-
CAK1062 Assembly Tool.
Length
2 m S3200-CN201-20-20
5 m S3200-CN501-20-20
10 m S3200-CN102-20-20
15 m S3200-CN152-20-20
20 m S3200-CN202-20-20
Over 20 m S3200-CN-20-20
(Specify length (m) when ordering.)
2 m S3200-CN201-20-25
5 m S3200-CN501-20-25
10 m S3200-CN102-20-25
15 m S3200-CN152-20-25
20 m S3200-CN202-20-25
Over 20 m S3200-CN-20-25
(Specify length (m) when ordering.)
2 m S3200-CN201-25-25
5 m S3200-CN501-25-25
10 m S3200-CN102-25-25
15 m S3200-CN152-25-25
20 m S3200-CN202-25-25
Over 20 m S3200-CN-25-25
(Specify length (m) when ordering.)
Specifications
Section 3-3
Model
Manufacturer
Sumitomo Electric
Industries, Ltd.
75