Unit Installation - Omron C200HW-CLK21 Operation Manual

Unit Installation

Repeater Unit Indicators
Dimensions (Unit: mm)
3-2 Unit Installation
Note
58
Name Color
PWR Green
(Power supply)
T/R1 Yellow
(SL1 communicat-
ing)
TR2 Yellow
(SL2 2 communicat-
ing)
(30)
Two, 4.5 dia.
21
• The Controller Link Unit is mounted onto a CPU Backplane or Expansion
CPU Backplane for use. For detailed information on into a PLC installation
procedures, refer to the PLC Installation Guide.
• Repeater Units are not mounted to the PLC. They are mounted sepa-
rately with screws or onto a DIN Track.
• A Repeater Unit is not mounted to a PLC Rack, but rather is mounted to
DIN Track or screw-mounted.
1. Always turn off power to the PLC before mounting the Controller Link Unit
into the Backplane or connecting the Bus Connection Unit.
Status
Lit Power supply is ON.
Not lit Power supply is OFF.
Lit Transmission signal is being sent or
received.
Not lit No transmission signal.
Lit Transmission signal is being sent or
received.
Not lit No transmission signal.
Section 3-2
Meaning
8
59
(Unit: mm)