Terminating Resistance Status: 0: Off - Omron C200HW-CLK21 Operation Manual

Memory Areas
Communications Unit Flags, Control Bits, and Status Information
Local Data Link Participation Status: IR 90 (See page 309.)
Data Link Status: IR 91 to IR 93 (See pages 156, 309.)
When the first data link status word is not set or is set to the default (0000) for either the manually set data link
tables or automatically set data link tables, the data link status is stored in the following words for nodes 1 to 6
only.
Node 2
IR 91
Node 4
IR 92
Node 6
IR 93
Terminating Resistance Status: IR 95 (See page 312.)
362
1: Local node data link participating
0: Local node data link not participating or data link
inactive
Node 1
Node 3
Node 5

Terminating resistance status: 0: OFF

PLC status
0: Inactive (user program not running)
1: Active (user program running)
PLC's CPU Unit error
0: Normal
1: Error
Communications error (data link reception)
0: Normal
1: Error
Data link participation
0: Not in data link or data link inactive
1: In data link
Offset error Error: Offset exceeds
0: Normal number of send words.
1: Error
Insufficient (short) receive area
0: Sufficient
1: Insufficient
Remaining receive area
0: Not remaining
1: Remaining
1: ON
Appendix B
Insufficient: Receive
area is smaller than
send area. Excess data
is truncated; other data
is received.
Remaining: Receive
area is larger than send
area. Data is received
and remaining words
are cleared.