Checking The Connection Status - Omron V330-F Series Quick Start Manual

7.4. Checking the Connection Status

Execute the transferred project file to check that Ethernet communications work correctly.
Precautions for Correct Use
Before performing the following steps, confirm that the LAN cable is connected securely.
If it is not connected, first turn OFF the power supply to the device and then connect the LAN
cable.
7.4.1. Executing the Project File and Checking the Receive Data
Execute the project file and check that correct data is written to controller variables.
Precautions for Safe Use
Confirm the system safety before you execute the project file.
The connected devices may malfunction regardless of the operating mode of the unit,
resulting in injury.
1
This document uses the 2D code
shown in the right figure as an
example of reading.
Set the code reader to the
position where it can read the 2D
code in the right figure.
2
Confirm that the RUN mode is
shown in the Controller Status
Pane of the Sysmac Studio.
If PROGRAM mode is shown,
select Mode – RUN Mode from
the Controller Menu.
A confirmation dialog box
appears. Click Yes.
7. Connection Procedure
23