Mounting A Repeater Unit - Omron C200HW-CLK21 Operation Manual

Unit Installation
Name
CPU Backplane (8 slots)
CPU Unit
Controller Link Unit (Optical)
Total
CQM1H-series PLCs
3-2-2

Mounting a Repeater Unit

64
Example: Using the C200HW-PA204 Power Supply Unit supplying a maxi-
mum current of 4.6 A (5 V) and maximum power of 30 W.
Model Current consumption
CS1W-BC083 0.11 A
CS1H-CPU67H 0.82 A
CS1W-CLK21-V1 0.33 A
Only one Controller Link Unit can be connected in a CQM1H-series PLC.
Connect the Controller Link Unit to the left side of the CPU Unit and then con-
nect the Power Supply Unit to the left of the Controller Link Unit.
After the Units have been connected, secure them with the slide locks on the
top and bottom of the Units.
CPU Backplane
Power Supply Unit
3/5/10 slots
Expansion CPU
Backplane
11 slots
Note The CQM1H-CLK21 Controller Link Unit can be connected only to the
CQM1H-CPU51/61 CPU Unit. It cannot be connected to the CQM1H-CPU11/
21 CPU Unit.
Repeater Units can be either mounted on a DIN Track or screw-mounted.
Number of
per Unit (A) Units
1
1
8
CQM1H-CLK21
Controller Link Unit
CPU
Unit
Of these
14, 16, or
21 slots,
installa
tion is
possible
in up to 4
slots.
Section 3-2
Current consumption
(A)
0.11 A
0.82 A
2.64 A
3.57 (power consump-
tion: 17.85 W)
CQM1H-CPU51/61
CPU Unit