Wiring; Communications Cables - Omron C200HW-CLK21 Operation Manual

Wiring

3-3 Wiring
3-3-1

Communications Cables

Communications Cables
Note
66
PFP-100N2
PFP-100N/50N
End Plate: PFP-M (2 Plates required per Repeater Unit)
Using the specified twisted-pair cable, connect all nodes using the multidrop
method.
Terminating resistance
Terminating resistance
switch (OFF)
switch (ON)
The following shielded twisted-pair cables should be used for Controller Link
Network connections.
Model
Li2Y-FCY2 x 0.56 qmm
–
1 x 2 x AWG 20PE + Tr.CUSN + PVC
#9207
ESVC 0.5 x 2 C
ESNC0.5X2C-99-087B
1. Use the specified cable only.
2. Keep communications cables separated from power lines or a high-tension
lines to prevent influences from electronic noise.
Controller Link Unit
Terminating resistance
switch (OFF)
Kromberg & Schubert,
Komtec Department
Draka Cables Industrial
Belden
Bando Densen Co.
Japan Electric Wire & Cable Co.
Section 3-3
g
BD H
#
BD L
SHLD
Terminating resistance
switch (ON)
Manufacturer