6-5-12 Error Log Clear - Omron C200HW-CLK21 Operation Manual

Commands and Responses for Controller Link Units

6-5-12 ERROR LOG CLEAR

Command Block
Response Block
The configuration of each error record is as follows:
1st byte
Error code Details
Error code, details: These parameters show the contents of errors. For
details, refer to 9-3-2 Error Codes.
Date and time: These parameters show the seconds, minutes, hour (0 to
23), date, month, and year (the rightmost two digits) in BCD specifying the
time that the error occurred.
Note 1. If the PLC does not have the specified number of records, all the records
that have been stored in the PLC up to the point that the command is exe-
cuted will be returned.
2. If there is no error log registered, a response code of 1103 (Hex) will be
returned.
Clears all error log records and sets the error log pointer to 0.
21 03
Command
format
21 03
Command Response
format code
10th byte
Minute Day Hour Year Month
Second
Section 6-5
211