Reading Upper Station Node Address; Reading Wireless Network Status - Omron WD30-ME Operation Manual

List of Explicit Messages Addressed to DeviceNet Wireless Master Station List of Explicit Messages Addressed to DeviceNet Wireless Master Station

7-2-10 Reading upper station node address

Command format
Response format
Parameter details

7-2-11 Reading wireless network status

Command format
96
D7 D6 D5 D4
0
Upper station node address
Reads the node address of the upper station on the relay route of a specified
wireless slave station.
00
0E 00 A8
ClassID
ServiceCode
Destination node address
00
03 00
No. of received bytes
Source node address
"InstanceID" (command)
Sets WNODE:01 - 40 Hex of a specified wireless slave station.
"Data" (response)
The read node address of the upper station is stored as follows. The data con-
sists of 1-byte character codes.
D7 D6 D5 D4
0
Upper station node address
Reads the status information of wireless network between the master station
and a specified wireless slave station.
00 0E 00 AA
ClassID
ServiceCode
Destination node address
D3 D2 D1 D0
6E
InstanceID
AttributeID
8E
Data
ServiceCode
D3 D2 D1 D0
64
InstanceID
AttributeID
Section 7-2