Adding Nodes And Editing Active Data Link Tables - Omron C200HW-CLK21 Operation Manual

Adding Nodes and Editing Active Data Link Tables

This section describes the methods used to perform functions without turning OFF the PLC power to the existing network,
such as adding nodes to the Controller Link Network and changing data link tables while the data links are active.
10-1 Adding Nodes Using a Repeater Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10-1-1 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10-1-2 Procedure for Adding Nodes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10-1-3 Precautions when Connecting Nodes Using a Repeater Unit. . . . . .
10-2 Changing the Data Link Tables with Active Data Links. . . . . . . . . . . . . . . . .
10-2-1 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10-2-2 Example of Changing Data Link Table with Active Data Links . . .
10-2-3 Operations when Changing Data Link Tables . . . . . . . . . . . . . . . . .
10-2-4 Timing Required to Change Data Link Tables with Active Data Links
(Theoretical) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10-2-5 Procedure for Changing the Data Link Tables with CX-Programmer
SECTION 10
332
332
333
333
336
336
336
336
337
338
331