Lexmark CX310 Service Manual page 50

3
Close the front door.
4
From the printer control panel, touch Done to clear the message and continue printing.
200 paper jam messages
Error code Description
200.xx A single page of media jam at the input (S2)
sensor.
Multiple pages of media are jammed at the
input sensor.
200.01 The input (S2) sensor is obstructed.
200.02 The input (S2) sensor was made early.
200.03 The input (S2) sensor did not make.
200.05 The input (S2) sensor did not break.
200.20 The staging motor has an error.
200.21 The staging motor has an error.
200.22 The staging motor has an error.
201.xx A software induced stoppage has occurred.
This should not happen in the field.
Action
Go to "200.xx Input (S2) sensor service check" on page
Go to "200.xx Input (S2) sensor service check" on page
Go to "200.xx Input (S2) sensor service check" on page
Go to "200.xx Input (S2) sensor service check" on page
Go to "200.xx Input (S2) sensor service check" on page
Go to "Paper pick motor drive assembly service check" on
page 102.
Go to "Paper pick motor drive assembly service check" on
page 102.
Go to "Paper pick motor drive assembly service check" on
page 102.
POR the printer.
Diagnostic information
50
7527
51.
51.
51.
51.
51.