AIO release lever removal
1
Remove the right scanner cover. See
2
Remove the screw (A) securing the AIO link to the flatbed unit.
3
Disengage the AIO link from the flatbed unit.
4
Remove the screw (B) securing the AIO release lever to the flatbed.
5
Slide the AIO release lever towards the back of the flatbed.
6
Remove the spring and AIO release lever.
Installation note: When reinstalling the AIO release lever, place the release lever on the flatbed, and then inset
the spring before replacing the screw.
"Right scanner cover removal" on page
Repair information
320
331.
7527