Steps Before Starting The 9Yy Service Checks - Lexmark CX310 Service Manual

Mfp
Hide thumbs Also See for CX310:
Table of Contents

Advertisement

Fan error service check
Actions
Turn the printer off, and remove the rear cover. See
on page
307.
Turn the printer on, and check the fan cable at JFAN1 for the following
values:
Pin 1: +3.3 V dc
Pin 2: Ground
Pin 3 0 (fan off)
Are the measured values correct?

Steps before starting the 9yy service checks

Before starting the service checks in this section, you will need to retrieve certain information. This will aid your next
level of support in diagnosing the problem before replacing the controller board.
Warning—Potential Damage: Do not replace the controller board unless directed by your next level of support.
1
Collect the history information and firmware logs (Fwdebug and logs.tar.gz) from the SE menu.
2
Collect the settings from the menu settings page.
3
Collect information from the user.
Note: Not all of the items can be retrieved from the printer you are working on.
Yes
"Rear cover removal"
Replace the fan.
Diagnostic information
104
7527
No
Replace the controller
board. See
"Controller
board removal" on
page
309.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cx410Xc2132Cx510

Table of Contents