Alignment Menu; Scanner Calibration - Lexmark CX310 Service Manual

Alignment Menu

Use the alignment menu to align the image on the page for cyan, yellow, and magenta. The black image should be
aligned using REGISTRATION before the individual colors are aligned.
Warning—Potential Damage: Read the instructions for the alignment carefully.
Setting alignment for color
1
From the Diagnostics menu, touch Alignment Menu.
2
Select CYAN, YELLOW, or MAGENTA.
3
Touch Quick Test. You may need to scroll to the next page.
A two-page instruction sheet prints.
The printer prints the test page from the default paper source, however if the default source only supports
envelopes, then the page prints from Tray 1. Print on A4 or letter paper for the best results.
4
Determine which settings to change and follow the instructions on the printed sheets to determine the adjustment.
Description
Top Margin
Left Margin
Right Margin
Linearity
5
Touch (-) to decrease the value or (+) to increase the value. After the value appears, touch to save the value or Back
to cancel.
6
Reprint the Quick Test to evaluate the changes. Continue until each adjustment is correct.
7
Repeat steps 4 through 6 as needed.
8
Continue until all three colors are aligned. A separate Quick Test prints for each color.
9
Touch Back to exit the Alignment Menu

Scanner calibration

This diagnostic test is used to calibrate both the Black and white values for the ADF and the flatbed. The following values
can be adjusted using this menu item:
•
Flatbed Black – Values are -10 to 10. The default value is 0.
• ADF Front Black – Values are -10 to 10. The default value is 0.
•
ADF Back Black – Values are -10 to 10. The default value is 0.
• Flatbed White – Values are -10 to 10. The default value is 0.
•
ADF Front White – Values are -10 to 10. The default value is 0.
•
ADF Back White – Values are -10 to 10. The default value is 0.
Range
-128 to +127
-2500 to +2500 (-1000 to +1000 for Yellow)
-2500 to +2500 (-1000 to +1000 for Yellow)
Linearity has a separate Quick Test sheet and adjustment instructions.
Service menus
196
7527