Supported Paper Sizes, Types, And Weights - Lexmark CX310 Service Manual

•
Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a jam. Partial sheets
also contaminate the printer and the cartridge with adhesive, and could void the printer and toner cartridge
warranties.
•
Do not use labels with exposed adhesive.
•
Before loading labels on the tray, flex and fan labels to loosen them. Straighten the edges on a level surface.
Tips on using card stock
Card stock is heavy, single‑ply specialty media. Many of its variable characteristics, such as moisture content, thickness,
and texture, can significantly affect print quality.
•
From the printer control panel, set the paper size, type, texture, and weight in the Paper menu to match the card
stock loaded in the tray.
• Print samples on the card stock being considered for use before buying large quantities.
•
Specify the paper texture and weight from the tray settings to match the paper loaded in the tray.
•
Preprinting, perforation, and creasing may significantly affect the print quality and cause jams or other paper feed
problems.
• Before loading the card stock on the tray, flex and fan the card stock to loosen them. Straighten the edges on a
level surface.

Supported paper sizes, types, and weights

The following tables provide information on standard and optional paper sources and the sizes, types, and weights of
paper they support.
Note: For an unlisted paper size, select the closest larger listed size.
Supported paper sizes
Note: Your printer model may have a 650‑sheet duo tray, which consists of a 550‑sheet tray and an integrated
100‑sheet multipurpose feeder. The 550‑sheet tray of the 650‑sheet duo tray supports the same paper sizes as the
optional 550‑sheet tray. The integrated multipurpose feeder supports different paper sizes, types, and weights.
Paper size and Standard
dimension 250‑sheet
A4
210 x 297 mm
(8.3 x 11.7 in.)
1
The paper source supports paper size without size sensing.
2
Universal is supported in the standard 250‑ and optional 550‑sheet trays only if the paper size is from 148 x 215.9 mm
(5.83 x 8.5 in.) to 215.9 x 355.6 mm (8.5 x 14 in.).
3
Universal is supported in the multipurpose feeder and manual feeder only if the paper size is from 76.2 x 127 mm (3 x 5 in.)
to 215.9 x 359.9 mm (8.5 x 14.17 in.).
4
Universal is supported in duplex mode only if the width is from 210 mm (8.27 in.) to 215.9 mm (8.5 in.), and the length is
from 279.4 mm (11 in.) to 355.6 mm (14 in.).
Manual 650‑sheet duo tray
feeder
550‑sheet
tray
tray
1
General information
550‑sheet
Multipurpose
feeder
1 1
29
ADF Scanner
tray glass
1
7527
Duplex
mode