Scanner Disabled Error Service Check - Lexmark CX310 Service Manual

Error code
843.06
843.99
846.00
846.01
846.02
846.03
846.04
846.05
846.06
846.07
849.01
849.10

Scanner disabled error service check

Actions
Step 1
POR the machine into Configuration menu > Disable scanner. From there,
select Enabled to change the settings to reenable the scanner module and
then save the setting.
POR the MPF to operating mode. Try running a copy from the ADF and
flatbed.
Did the 840.xx error reoccur?
Step 2
Reenter the Configuration mode, and scroll to and select the Disable
Scanner menu item.
Does the screen display "ADF disabled" or "Auto Disabled"?
Description
ADF nudger
Scanner complete timeout error
Scanner failure: Calibration strip
Rear Calibration Strip Unusable
Front calibration strip too far left
Front calibration strip too far right
The front calibrations strip is placed too high or
too low.
Front calibration strip has excessive skew
Front calibration strip has excessive bow
Front calibration strip has excessive dark area
Front excessive variability for Mono, Red,
Green, or Blue.
Front magnification exceeds limits
Rear excessive variability for Mono, Red, Green,
or Blue.
Configuration error—the device had modem
installed, but configID indicates it should not.
Configuration error—the device had HD
installed, but configID indicates it should not.
Diagnostic information
Action
Go to "ADF service check" on page
Go to "ADF service check" on page
Go to "CCD service check" on page
Go to "CCD service check" on page
Go to "CCD service check" on page
Go to "CCD service check" on page
Go to "CCD service check" on page
Go to "CCD service check" on page
Go to "CCD service check" on page
Go to "CCD service check" on page
Go to "Scanner configuration error service
check" on page
Go to "Scanner configuration error service
check" on page
Yes
Go to step 2.
Go to step 3.
141
7527
143.
143.
144.
144.
144.
144.
144.
144.
144.
144.
144.
144.
No
The problem is solved.
Go to step 8.