•
Operator panel assembly
•
Controller board
Note: The UICC card is part of the operator panel.
Note: The following parts (FRUs) can be accessed from this section:
•
Operator panel (one for each CX310 and CX410)
•
Display and PCBA (CX310)
•
Display (CX410)
•
UICC PCBA (CX410)
•
User interface support bracket (common to CX310 and CX410)
•
Front operator panel cover (common to CX310 and CX410)
•
Upper front (operator) cover (common to CX310 and CX410)
•
Speaker (CX410)
1
Lift the flatbed scanner assembly on the right side.
2
Remove the three screws (A) from beneath the operator panel.
Repair information
277
7527