Verifying The Installation Using The Self-Test Screen; Figure 2-11. Baystack 410-24T Switch Self-Test Screen - Nortel BayStack 410 24T Using Manual

Verifying the Installation Using the Self-Test Screen

If a monitor is connected to the switch (see
you can observe the BayStack 410-24T switch Self-Test screen
shows an example of a standalone switch Self-Test screen).
The results of the self-test are displayed briefly (5 or 10 seconds) in the Self-Test
screen, which is followed by the Nortel Networks Logo screen
Note: The Self-Test screen remains displayed only if the self-test detects a
fatal error.
BayStack 410-24T Self-Test
CPU RAM test
ASIC addressing test
ASIC buffer RAM test
ASIC buffer stack init test
Port internal loopback test
Cascade SRAM test
Fan test
Self-test complete.
Figure 2-11. BayStack 410-24T Switch Self-Test Screen
Note: The Self-Test screen for a switch that is participating in a stack
configuration includes an additional test:
309985-B Rev 00
Installing the BayStack 410-24T Switch
"Console/Comm
... Pass
... Pass
... Pass
... Pass
... Pass
... Pass
... Pass
Cascade SRAM test.
Port" on page 2-10),
(Figure 2-11
(Figure 2-12).
2-15