Figure 1-52. Address-Based Mirroring Configuration Example - Nortel BayStack 410 24T Using Manual

Using the BayStack 410-24T 10BASE-T Switch
S2
Figure 1-52.
In this configuration, the designated monitor port (port 23) can be set to monitor
traffic in any of the following modes:
• Monitor all traffic transmitted from address A to any address.
• Monitor all traffic received by address A from any address.
• Monitor all traffic received by or transmitted by address A.
• Monitor all traffic transmitted by address A to address B.
• Monitor all traffic between address A and address B (conversation between
the two stations).
Figure 1-53
1-84
Address A
S1
F
F
S3
Address-Based Mirroring Configuration Example
shows the Port Mirroring Configuration screen setup for this example.
StackProbe
T1
Monitor port
(port 23)
T2
Address B
BS41038A
309985-B Rev 00