Main Menu; Figure 3-2. Console Interface Main Menu - Nortel BayStack 410 24T Using Manual

Using the BayStack 410-24T 10BASE-T Switch

Main Menu

This section describes the options available from the CI main menu
The CI screens and submenus for these options are described in the following
sections.
Note: Some menu options shown in this main menu example and in other
screen examples in this chapter may not appear on your screen, depending on
the switch options installed. However, the full menu options are shown in the
screen examples and described in the following sections.
Use arrow keys to highlight option, press <Return> or <Enter> to select option.
Figure 3-2. Console Interface Main Menu
3-4
BayStack 410-24T Main Menu
IP Configuration/Setup...
SNMP Configuration...
System Characteristics...
Switch Configuration...
Console/Comm Port Configuration...
Identify Unit Numbers
Renumber Stack Units...
Display Hardware Units...
Spanning Tree Configuration...
TELNET Configuration...
Software Download...
Configuration File...
Display Event Log
Reset
Reset to Default Settings
Logout
(Figure 3-2).
309985-B Rev 00