Nortel BayStack 410 24T Using Manual page 165

10base-t switch
Table of Contents

Advertisement

Table 3-8.
MAC Address Security Configuration Screen Fields
Field
DA Filtering on Intrusion
Generate SNMP Trap on
Intrusion
Clear by Ports
Learn by Ports
Current Learning Mode
309985-B Rev 00
Description
When set to Enabled, this field isolates the intruding node by filtering
(discarding) packets sent to that MAC address.
Default
Disabled
Range
Disabled, Enabled
When set to Enabled and a MAC intrusion event is detected, the software
issues an SNMP trap message to all registered SNMP trap addresses (see
your switch's User Guide for more information).
Default
Disabled
Range
Disabled, Enabled
This field clears the specified port (or ports) that are listed in the
Allowed Source field of the MAC Address Security Table screen (see
Address Security
Table" on
be cleared using this field, the specific port (or ports) will be cleared for each
of the entries listed in the MAC Address Security Table. If you totally clear the
allowed Source field (leaving a blank field) for any entry, the associated MAC
address for that entry is also cleared. This field also clears the associated Port
List field in the MAC Address Security Port Lists screen
Default
NONE
Range
NONE, ALL, A port number list (for example, 1/1-4, 3/6,
4/ALL, etc.)
All source MAC addresses of any packets received on the specified port (or
ports) are added to the MAC Security Table when the Current Learning Mode
field (see next field description) is set to Enabled. You cannot include any of
the ports that are enabled for MAC address security (see
Security Port
Configuration" on
Default
NONE
Range
NONE, ALL, A port number list (for example, 1/1-4, 3/6,
4/ALL, etc.)
Indicates the current learning mode for the switch ports. When this field is set
to Enabled, all source MAC addresses of any packets received on the
specified port (or ports) are added to the MAC Security Table (maximum of
448 MAC address entries allowed).
Default
Disabled
Range
Disabled, Enabled
Using the Console Interface
page
3-35). When you specify a port (or ports) to
page
3-28).
(continued)
"MAC
(Figure
3-13).
"MAC Address
3-27

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Baystack 410-24t

Table of Contents