Snmp Configuration - Nortel BayStack 410 24T Using Manual

SNMP Configuration

The SNMP Configuration screen
SNMP configuration parameters.
Choose SNMP Configuration (or press m) from the main menu to open the SNMP
Configuration screen.
Read-Only Community String:
Read-Write Community String:
Trap #1 IP Address:
Community String:
Trap #2 IP Address:
Community String:
Trap #3 IP Address:
Community String:
Trap #4 IP Address:
Community String:
Authentication Trap:
AutoTopology:
Enter text, press <Return> or <Enter> when complete.
Press Ctrl-R to return to previous menu.
Figure 3-4. SNMP Configuration Screen
Table 3-3
Table 3-3. SNMP Configuration Screen Fields
Field
Read-Only
Community String
309985-B Rev 00
SNMP Configuration
[ public ]
[ private ]
[ 0.0.0.0 ]
[
[ 0.0.0.0 ]
[
[ 0.0.0.0 ]
[
[ 0.0.0.0 ]
[
[ Enabled
[ Enabled
describes the SNMP Configuration screen fields.
Description
The community string used for in-band read-only SNMP operations.
Default Value public
Range Any ASCII string of up to 32 printable characters
(Figure 3-4) allows you to set or modify the
]
]
]
]
]
]
Press Ctrl-C to return to Main Menu.
Using the Console Interface
3-13