Vlan Configuration - Nortel BayStack 410 24T Using Manual

Using the BayStack 410-24T 10BASE-T Switch

VLAN Configuration

The VLAN Configuration screen
memberships to standalone or stacked unit ports. You can also create port-based
VLANs and protocol-based VLANs:
• Port-based VLANs allow you to explicitly configure switch ports as VLAN
port members.
• Protocol-based VLANs allow you to configure your switch ports as members
of a broadcast domain, based on the protocol information within a packet.
Protocol-based VLANs can localize broadcast traffic and assure that only the
protocol-based VLAN ports are flooded with the specified protocol-type
packets.
When you configure ports as VLAN port members, they become part of a set of
ports that form a broadcast domain for a specific VLAN. You can assign switch
ports, whether standalone or stacked unit ports, as VLAN port members of one or
more VLANs.
You can assign VLAN port members attributes that allow the individual ports to
operate in accordance with the IEEE 802.1Q tagging rules. You can define each of
the VLAN port members as tagged or untagged (see "IEEE 802.1Q Tagging" on
page 1-37 for a description of important terms used with 802.1Q VLANs).
You can also use this screen to create and to delete specific VLANs, to assign
VLAN names, and to assign any VLAN as the management VLAN.
Choose VLAN Configuration (or press v) from the VLAN Configuration Menu
screen to open the VLAN Configuration screen.
3-40
(Figure 3-17) allows you to assign VLAN port
309985-B Rev 00