Mac Address Table - Nortel BayStack 410 24T Using Manual

Using the BayStack 410-24T 10BASE-T Switch
Table 3-5. Switch Configuration Menu Screen Options
Option
IGMP Configuration...
Display Port Statistics
Clear All Port Statistics
Return to Main Menu

MAC Address Table

The MAC Address Table screen
that the switch has learned or to search for a specific MAC address.
The MAC Address Table screen also operates in conjunction with the Port
Mirroring Configuration screen. When you configure a switch for MAC
address-based port mirroring, you can use the MAC Address Table screen to find
an address, and enter the address directly from this screen. You can enter
addresses from either screen, but you must return to the Port Mirroring
Configuration screen to activate the feature (see
on page
Choose MAC Address Table (or press m) from the Switch Configuration Menu
screen to open the MAC Address Table screen.
3-20
Description
Displays the IGMP Configuration Menu (see
Menu" on page
traffic by setting up IGMP port memberships that filter multicast on a
per port basis (see "IGMP Snooping" on page 1-52 for more
information about this feature).
Displays the Port Statistics screen (see
This screen allows you to view detailed information about any switch
port.
Allows you to clear all port statistics.
This option is followed by screen prompts that precede a choice of
actions:
• If the switch is operating standalone, choose one of the following:
• Yes, to clear all port statistics for all switch ports
• No, to abort the option
• If the switch is participating in a stack configuration, choose one of
the following:
• Clear all port statistics for a specific unit in the stack
• Clear all port statistics for the entire stack
• No, to abort the option
Exits the Switch Configuration Menu screen and displays the main
menu.
3-64).
(continued)
3-71). This screen allows you to optimize multicast
(Figure 3-7) allows you to view MAC addresses
"Port Mirroring
"IGMP Configuration
"Port Statistics" on page
Configuration"
309985-B Rev 00
3-78).