Traffic Class Configuration - Nortel BayStack 410 24T Using Manual

Using the BayStack 410-24T 10BASE-T Switch
Table 3-17
Table 3-17. VLAN Display by Port Screen Fields
Field
Unit
Port
PVID
Port Name
VLANs
VLAN Name

Traffic Class Configuration

The Traffic Class Configuration screen
or High traffic classification to any of eight (0 to 7) user_priority values assigned
to a received frame on specified switch ports.
Note: If you change the Traffic Class Configuration for any switch in a stack
configuration, the entire stack resets with the current configuration settings
(see
See "IEEE 802.1p Prioritizing" on page 1-57 for more information about this
screen.
Choose Traffic Class Configuration (or press t) from the VLAN Configuration
Menu screen to open the Traffic Class Configuration screen.
3-50
describes the VLAN Display by Port screen fields.
Description
Allows you to select the unit number (when stacking is configured) to view. To
view another unit, type its unit number and press [Enter], or press the
spacebar to toggle the unit numbers.
Allows you to select the number of the port you want to view. To view another
port, type its port number and press [Enter], or press the spacebar on your
keyboard to toggle the port numbers.
Read-only field that indicates the PVID setting for the specified port.
Read-only field that indicates the port name assigned to the specified port.
Column header for the read-only fields listing the VLANs associated with the
specified port.
Column header for the read-only fields listing the VLAN Names associated
with the specified port.
Table 3-1 on page 3-5
(Figure 3-20) allows you to assign a Low
for details of the Reset option).
309985-B Rev 00