Address-Based Mirroring Configuration - Nortel BayStack 410 24T Using Manual

Port mirroring configuration has taken effect.
Currently Active Port Mirroring Configuration
---------------------------------------------
Monitoring Mode:
Port X: 25 Port Y: 24
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 1-51. Port Mirroring Port-Based Screen Example

Address-Based Mirroring Configuration

Figure 1-52
port 23, the designated monitor port for switch S1, is monitoring traffic occurring
between address A and address B.
309985-B Rev 00
Port Mirroring Configuration
Monitoring Mode:
Monitor Unit/Port:
Unit/Port X:
Unit/Port Y:
Address A:
Address B:
-> Port X or
shows an example of an address-based mirroring configuration where
Introduction to the BayStack 410-24T Switch
[ -> Port X
[ /23 ]
[ /25 ]
[ /24 ]
[ 00-00-00-00-00-00 ]
[ 00-00-00-00-00-00 ]
Port Y -> Monitor Port: 23
Press Ctrl-C to return to Main Menu.
or Port Y -> ]
1-83