Multiservice Switch 7420 Installation - Nortel Multiservice Switch 7400 Installation & Maintenance

Multiservice Switch 7420 installation

Install a Nortel Multiservice Switch 7420 in or beside a desk-top (desk-top or
vertical-mount), or in a standard 19-inch rack or cabinet.
Prerequisites to Multiservice Switch 7420 installation
• See
instructions.
• Ensure that you have completed all site preparations.
• If you are installing Multiservice Switch equipment in a rack or cabinet,
ensure that it has been properly installed and grounded. For more
information, see
Multiservice Switch 7420 installation task flow
This task flow shows you the sequence of procedures you perform to install
Nortel Multiservice Switch 7420. To link to any procedure, go to
navigation (page
Copyright © 2005, Nortel
CAUTION
Risk of electrostatic damage
When handling processor cards, wear a grounded antistatic wrist
strap so that you do not damage electronic parts. For more
information, see Avoiding damage from static electricity (page
Unpacking a processor card (page 469)
Cabinet installation (page
12).
Nortel Multiservice Switch 7400
Hardware Installation, Maintenance, and Upgrade
NN10600-175 7.1S1 Standard
PCR7.1 and up October 2005
for FP and CP handling
61).
Task flow
Nortel Confidential
135).