Igmp Configuration - Nortel BayStack 410 24T Using Manual

Using the BayStack 410-24T 10BASE-T Switch
Table 3-27. IGMP Configuration Menu Screen Options
Option
Display Multicast Group
Membership...
Return to Switch
Configuration Menu

IGMP Configuration

Figure 3-32
configuration. When installed as a standalone switch, the screen does not display
the Unit # field designation.
In this example, switch ports 8 and 14 of unit 1, ports 2 and 6 of unit 2, and port 16
of unit 4 are set to receive all IP multicast-related traffic. The configured ports are
VLAN port members of VLAN 5, and are called Static Router Ports.
Choose IGMP Configuration (or press g) from the IGMP Configuration Menu
screen to open the IGMP Configuration screen.
3-72
Description
Displays the Multicast Group Membership screen (see
Membership" on page
addresses that are active in the current LAN.
Exits the IGMP Configuration Menu screen and displays the Switch
Configuration Menu screen.
shows an example of the IGMP Configuration screen in a stacked
(continued)
3-76). This screen allows you to view all IP multicast
"Multicast Group
309985-B Rev 00