Hardware Unit Information; Spanning Tree Configuration - Nortel BayStack 410 24T Using Manual

Hardware Unit Information

The Hardware Unit Information screen
including any installed MDA and Cascade modules, that are configured in your
standalone or stack configuration.
Choose Display Hardware Units (or press h) from the main menu to open the
Hardware Unit Information screen.
Switch Model
----------------
Unit #1 BayStack 450-24T
Unit #2 BayStack 450-12T
Unit #3 BayStack 450-24T
Unit #4 BayStack 410-24T
Unit #5 BayStack 450-24T
Unit #6 BayStack 450-12T
Unit #7 BayStack 450-24T
Unit #8 BayStack 410-24T
Press Ctrl-R to return to previous menu.
Figure 3-37. Hardware Unit Information Screen

Spanning Tree Configuration

The Spanning Tree Configuration Menu screen
spanning tree parameters and configure individual switch ports to participate in
the spanning tree algorithm (STA). To modify any of the spanning tree parameters,
see your SNMP documentation.
309985-B Rev 00
Hardware Unit Information
MDA Model
---------
None
450-1SX
400-4FX
400-4FX
None
450-1SX
400-4FX
None
Using the Console Interface
(Figure 3-37) lists the switch models,
Cascade MDA
-----------
400-ST1
400-ST1
400-ST1
400-ST1
400-ST1
400-ST1
400-ST1
400-ST1
Press Ctrl-C to return to Main Menu.
(Figure 3-38) allows you to view
3-91