Segment Switch Application - Nortel BayStack 410 24T Using Manual

Using the BayStack 410-24T 10BASE-T Switch

Segment Switch Application

Figure 1-7
alleviate user contention for bandwidth and eliminate server and network
bottlenecks. Before segmentation, 88 users had a total bandwidth of only 10 Mb/s
available. After segmentation, 114 users have 40 Mb/s, four times the previous
bandwidth, while adding 22 dedicated 10 Mb/s connections. This configuration
can be extended to add more segments without degrading performance.
Before
Server
To
Network
Center
Key
10 Mb/s
100 Mb/s
200 Mb/s
- 88 users share 10 Mb/s (10/88 Mb/s per user)
- Server bottleneck (10 Mb/s bandwidth)
- Network center bottleneck (10 Mb/s bandwidth)
- Total of 88 users
Figure 1-7. BayStack 410-24T Switch Used as a workgroup Switch
1-24
shows the BayStack 410-24T switch used as a segment switch to
10BASE-T hubs
Server
Up to
88 users Network
Center
- Four sets of 23 users; each set shares 10 Mb/s
(10/23 Mb/s per user)
- Addition of 22 users; each with dedicated
10 Mb/s bandwidth
- Server with dedicated 100 Mb/s full-duplex bandwidth
(200 Mb/s bidirectional
- Network center with dedicated 100 Mb/s full-duplex bandwidth
(200 Mb/s bidirectional)
- Total of 114 users
After
BayStack 410-24T switch
To
Up to 22
users
Up to 23
users
Up to 23
users
Up to 23
users
Up to 23
users
BS41006A
309985-B Rev 00