Contivity 600 Option Installation - Nortel Contivity 600 Installing

Chapter 1

Contivity 600 option installation

This chapter provides instructions on how to install and replace the following field
replaceable units (FRUs) in the Contivity 600:
•
•
To install any of these components, you must remove the Contivity 600 chassis
from its steel enclosure.
This chapter contains the following topics:
Topic
Shutting down the system to add or replace hardware
Opening the Contivity 600
Installing and replacing an option card
Replacing a DIMM
LAN, WAN, and serial interface cards
Dual inline memory module (DIMM)
Installing Hardware Options for the Contivity Secure IP Services Gateway
23
Page
24
24
28
32