Connecting a Terminal to the Console/Comm Port
To connect a terminal to the Console/Comm port:
1.
2.
3.
Figure 2-7.
4.
5.
309985-B Rev 00
Set the terminal protocol as described in
page
2-10.
Connect the terminal (or a computer in terminal-emulation mode) to the
console port using the RS-232 cable.
Connect the female connector of the RS-232 cable directly to the
Console/Comm Port on the switch, and tighten the captive retaining
screws (see
Figure
2-7).
Comm Port
172FC
Connecting to the Console/Comm Port
Connect the other end of the cable to a terminal or the serial connector of
a personal computer running communications software.
Proceed to the next section,
power cord and power up the BayStack 410-24T switch.
Installing the BayStack 410-24T Switch
"Console/Comm
"Connecting
Power," to connect the AC
Port" on
2-11