Test Mode; Entering Function Mode; Function Modes - Konica Minolta bizhub 200 Service Manual

7. Test mode

7. Test mode
7.1

Entering Function Mode

1. Display the Tech. Rep. Mode screen.
See P.152 of the main unit service manual.
7.2

Function Modes

8: Creasing Unit movement mode
• Performs the creasing drive once.
→ Raises the Layable guide.
→ Stops after the predetermined time.
→ Lowers the Layable guide.
→ The operation is finished.
9: Saddle Unit exit open/close mode
• Opens the Saddle Exit after the Saddle Exit is opened and closed.
→ Stops after the predetermined time.
→ The Saddle Exit closes.
→ The Saddle In & Out Guide advances.
→ Stops after the predetermined time.
→ The Saddle In & Out Guide retracts.
→ The operation is finished.
22
4349F2E541DA
4349F2E542DA
4349F3E520DA
Confidential – for internal use only, do not distribute
Field Service Ver. 1.0 Aug. 2005
2. Touch [Function].
3. Touch [FC].
4. Touch [8] or [9].