Konica Minolta bizhub 200 Service Manual page 248

Modification Information 01 Dec. 2006
F. Vender 2
Functions • To set whether or not the Vender 2 is installed.
Use • Set when the Vender 2 is mounted.
Setting/ • Select the message for Vender 2.
Procedure
• Type 1: Select the message (for Coin vender)
• Type 2: Select the message (for Card keeper)
• Type 3: Select the message (for Coin vender & Card keeper)
NOTE
• The modem version of the CS Remote Care is not available when the Vender 2 is
set.
• When set the Vender 2 under the modem version of the CS Remote Care is set,
[RAM Clear] of the CS Remote Care should be conducted.
• When mounting or removing HDD with Vender 2 being selected, Clear FAX Set-
ting (Initial Mode) should be conducted.
• This setting is valid only when User Auth setting under the following setting is
[OFF], and Account Track is [OFF].
[Admin. Management] → [Admin. 1] → [Account/User Auth.] → [User Authentica-
tion ON/OFF]
Confidential – for internal use only, do not distribute
203-4