Replacing The Unit; Replacement Of The Fusing Unit - Konica Minolta bizhub 200 Service Manual

Field Service Ver. 2.5 Jul. 2006
3.6

Replacing the unit

3.6.1

Replacement of the Fusing Unit

CAUTION
• From the safety viewpoint, the Fusing Unit is replaced as a unit. No parts intended
for other models should be used for the Fusing Unit of this machine. Note, how-
ever, that the thermistor and several other parts mentioned in this machine may be
replaced as an individual part with a new one.
[2]
[1]
[4]
[5]
Confidential – for internal use only, do not distribute
1. Open the Right Door.
2. Remove the Rear Right Cover.
See P.49
3. Remove the screw [1] and the Front
Right Cover [2].
4040F2C560DA
4. Unplug two connectors [3] of the
Switch Back Unit.
[3]
4040F2C563DA
5. Loosen the screw [4] in front.
6. Remove the screw [5] in front.
[6]
7. Loosen the screw [6] in the back.
8. Remove the screw [7] in the back.
[7]
4040F2C564DA
9. Remove the Switch Back Unit [8].
[8]
4040F2C565DA
3. Periodical check
37