Konica Minolta bizhub 200 Service Manual page 177

8. Utility/Counter Mode
Port Number
Functions
• To change the port number used for communications with the LDAP server.
Use
• The default setting is "389".
Setting/
Procedure
Initialize Setting
Functions
• To format all settings made in LDAP Server Setting.
Use
Setting/ 1. Touch the [Initialize Setting].
Procedure 2. Select [Yes] and touch [Enter].
Check Connection
Functions
• To check connection to the LDAP server.
Use
1. Touch the [Check Connection].
Setting/
2. When the message indicating the completion of connection check appears, touch
Procedure
[Enter].
<Frame Type Set>
Functions • To set the frame type for NetWare settings of NIC.
Use • To specify the frame type used for communications.
• The default setting is "Auto Detect".
Setting/
Procedure
<IP Filtering>
Functions • To set IP filtering
Use • To set whether or not to accept it within the numeric area that specifies IP address.
<Accept Setting>
1. Select [Enable] or [Disable] at [Accept Setting]
2. Select 1 to 3 and enter the address with 10-key pad.
3. Press [Enter] to complete the setting.
Setting/
Procedure
<Deny Access>
1. Select [Enable] or [Disable] at [Deny Access].
2. Select 1 to 3 and enter the address with 10-key pad.
3. Press [Enter] to complete the setting.
138
1 to 65535
"Auto Detect" Ethernet-II
802.3 SNAP
Confidential – for internal use only, do not distribute
Field Service Ver. 2.5 Jul. 2006
802.2