Finisher Staple Misfeed; Finisher Punch Misfeed (Pu-501) - Konica Minolta bizhub 200 Service Manual

Field Service Ver. 2.0 Apr. 2006
9.3.3

Finisher Staple Misfeed

A. Detection Timing
Type
Finisher Staple misfeed
detection
B. Action
Staple Unit
Step
1 Initial check items
2 Drive Coupling Section check
3 I/O Check
4 Change Staple Unit
5 Change PWB-A FN
9.3.4

Finisher Punch Misfeed (PU-501)

A. Detection Timing
Type
Finisher Punch misfeed
detection
B. Action
Punch Unit
Step
1 Initial check items
2 Drive Coupling Section check
3 I/O Check
4 Change Punch Unit
5 Change PWB-A FN
Confidential – for internal use only, do not distribute
The Staple Home Position Sensor in the Staple Unit is not blocked even
after the set period of time has elapsed after the Staple Motor rotates for-
ward, and then the Staple Motor rotates backward, and the Staple Home
Position Sensor in the Staple Unit is blocked within the set period of time.
Relevant Electrical Parts
Action
Punch Positioning Sensors 1 and 2 are not blocked even after the set
period of time has elapsed after the Punch Motor is energized.
Relevant Electrical Parts
Action
Description
Main Control Board (PWB-A FN)
WIRING DIAGRAM
Control Signal
-
-
-
-
-
Description
Main Control Board (PWB-A FN)
WIRING DIAGRAM
Control Signal
-
-
-
-
-
9. Jam Display
Location
(Electrical Component)
-
-
-
-
-
Location
(Electrical Component)
-
-
-
-
-
39