Replacing The Tray 2 Separation Roller - Konica Minolta bizhub 200 Service Manual

3. Periodical check
3.5.8

Replacing the Tray 2 Separation Roller

[8]
[9]
[10]
[9]
[13]
28
[1]
4040F2C524DA
[3]
[2]
4040F2C526DA
[5]
[4]
4040F2C527DA
[6]
[7]
[7]
4040F2C591DA
[11]
[9]
[12]
4040F2C528DA
Confidential – for internal use only, do not distribute
Field Service Ver. 2.5 Jul. 2006
1. Slide out the Tray 2.
2. Remove the Multi Bypass Unit.
See P.70
3. Remove the Lower Right Cover [1].
4. Remove two screws [2] and the
Transport Roller Cover [3].
5. Remove two screws [2] and the Mis-
feed Clearing Cover [5].
6. Unplug two connectors [6].
7. Remove three screws [7] and the
Tray 2 Feed Roller Assy [8].
8. Remove four screws [9] and the C-
clip [10]. Then, remove the Tray 2
Feed Roller Cover [11], the Tray 2
Separation Roller Assy [12], and the
Tray 2 Feed Roller Clutch [13].