Settings In The Admin. Management; Admin. 1 - Konica Minolta bizhub 200 Service Manual

Field Service Ver. 2.5 Jul. 2006
8.5

Settings in the Admin. Management

• The Admin. Management will be available by entering the administrator password (8 dig-
its) set by the Admin. Set. (The administrator password is initially set to "12345678")
8.5.1

Admin. 1

2
A. Initial Setting
(1) Date & Time Setting
2
<Date & Time Setting>
Functions • To set the date and time of day.
Use • To set or change the date and time of day.
Setting/ • Use the Keypad to type in the date (Month, Day, and Year) and time of the day.
Procedure • Touching [Enter] will start the clock.
<Time Zone>
• To set the time difference from the standard time appended to the mail header when
Functions
sending e-mail.
Use • To change the time difference from the standard time.
• The default setting is "-05:00".
Setting/
Procedure
<Day Light Saving Time>
Functions • To adjust daylight saving time automatically.
Use • To set daylight saving time.
• The default setting is "Auto".
Setting/
Procedure
(2) Language for Communication
2
See P.18 of the FK-503 service manual.
(3) Self-Telephone # information
2
See P.18 of the FK-503 service manual.
(4) TSI Registration
2
See P.18 of the FK-503 service manual.
(5) Self-ID
See P.19 of the FK-503 service manual.
B. Admin. Set
(1) Administrator Code Input
Functions • To change the administrator access code.
• To change the administrator access code.
Use * To set enhance security mode ON, change the default administrator password to 8 digits
code that is not using all the same numbers.
[Current Code]: Enter the current administrator access code.
Setting/
[New Code]: Enter the new administrator access code.
Procedure
[Retype New Code]: Enter the new administrator access code again for confirmation.
Confidential – for internal use only, do not distribute
-12:00 to +12:00
"Auto" OFF
8. Utility/Counter Mode
127