Settings In The Printer Setting; Mfp Set; Default Set - Konica Minolta bizhub 200 Service Manual

8. Utility/Counter Mode
8.7

Settings in the Printer Setting

8.7.1

MFP Set

A. Proof Print Hold Time
Functions
• To change the hold time of the proof print job.
Use
• The default setting is "10 min."
Setting/
Procedure
B. Overwrite A4←→Letter
Functions • To set whether to enable or disable the override function of A4 and Letter.
• To enable the function that allows Letter to be used instead of A4, or vice versa, for
Use
printout.
• The default setting is "OFF".
Setting/
Procedure
C. Document Hold Time
Functions
• To change the hold time of print data invoked when a condition, in which memory
capacity has exceeded, at the expiration of which the print data is discarded.
Use
Setting/ • The default setting is "5Min".
Procedure • Setting range: 0 to 30
D. PostScript Error Report
• To set whether or not to print error information when an error occurs during computer
Functions
printing.
Use • To print error information when an error occurs during computer printing.
• The default setting is "OFF".
Setting/
Procedure
8.7.2

Default Set

A. Basic
(1) Tray
• To set a paper source when none is specified by the printer driver during computer
Functions
printing.
• To specify a paper source when one cannot be specified by the printer driver during
Use
printing from Windows DOS or in a similar case.
Setting/
• The default setting is "Auto Paper Select".
Procedure
146
"10 min." 20 min.
ON "OFF"
ON "OFF"
Confidential – for internal use only, do not distribute
Field Service Ver. 2.5 Jul. 2006
30 min.