Suzuki 2000 Grand Vitara SQ625 Service Manual page 726

6K-2 EXHAUST SYSTEM
COMPONENTS
NOTE:
Tighten bolts and nuts ((a), (b), (c)) to specified torque, referring to "MUFFLER" in this section.
1-1. Exhaust manifold (J20 engine without WU-TWC)
1-2. Exhaust manifold (G16 engine without WU-TWC)
1-3. Exhaust manifold (G16 engine with WU-TWC)
1-4. Exhaust manifold (J20 engine with WU-TWC)
1-5. Exhaust manifold (H25 engine)
1-2. Gasket
3-1. Exhaust No.1 pipe (G16 / J20 engines without WU-TWC)
3-2. Exhaust No.1 pipe (G16 / J20 engines with WU-TWC)
3-3. Exhaust No.1 pipe (H25 engine)
1-4. Heated oxygen sensor-1
1-5. Gasket
1-6. Exhaust No.2 pipe
1-7. Gasket
1-8. Muffler
1-9. Rubber mounting
110. Heated oxygen sensor-2
111. No.2 Exhaust pipe bracket (J20, G16 engine)
112. No.1 Exhaust pipe bracket (J20 engine)
113 Exhaust pipe bracket (H25 engine)
114. Exhaust pipe damper
115. No.1 Exhaust pipe bracket (G16 engine)
Tightening Torque
(a): 50 N
5.0 kg-m
36.5 lb-ft
(b): 45 N
4.5 kg-m
32.5 lb-ft
(c): 60 N
6.0 kg-m
43.5 lb-ft
.
m
.
m
.
m