6A4-30 ENGINE MECHANICAL (J20 ENGINE)
1. Intake camshaft timing sprocket
2. Exhaust camshaft timing sprocket
PUSH
1. Timing chain tensioner adjuster No.2
2. Stopper
6) Install intake and exhaust camshaft timing sprocket bolts.
To install it, fit a spanner to hexagonal part at the center of cam-
shaft to hold stationary.
Tightening Torque
(a): 80 N
7) Push back plunger into tensioner body and hold it with stopper
at the position by inserting stopper into body.
1. Plunger
2. Body
3. Stopper
8) Install timing chain tensioner adjuster No.2 with gasket.
Tightening Torque
(a): 11 N
(b): 45 N
9) Pull out stopper from timing chain tensioner adjuster No.2.
.
m (8.0 kg-m, 57.5 lb-ft)
.
m (1,1 kg-m, 8.0 lb-ft)
.
m (4.5 kg-m, 33.0 lb-ft)