Suzuki 2000 Grand Vitara SQ625 Service Manual page 454

1. Crank timing sprocket key
2. Timing mark
1. Crankshaft
2. Crankshaft timing sprocket
1. Idler sprocket
2. Match mark on idler sprocket
1. Crankshaft timing sprocket
2. Match mark
1. Timing chain tensioner
2. Spacer
INSTALLATION
1) Check that crank timing sprocket key is in match with timing
2) Install crankshaft timing sprocket as shown in figure.
3. Cylinder block
4. Mark
3) Apply oil to bush of idler sprocket.
4) Install sprocket shaft and idler sprocket.
5) Install 1st timing chain by aligning dark blue plate of 1st timing
3. 1st timing chain
4. Dark blue plate
6) Bring yellow plate of 1st timing chain into match with match mark
3. 1st timing chain
4. Yellow plate
7) Install timing chain tensioner as shown in figure.
mark on cylinder block.
Match mark faces to chain cover.
chain and match mark on idler sprocket.
on crankshaft timing sprocket.
Tightening Torque
.
(a): 25 N m (2.5 kg-m, 18.5 lb-ft)
ENGINE MECHANICAL (J20 ENGINE) 6A4-35