Suzuki 2000 Grand Vitara SQ625 Service Manual page 310

6A1-68 ENGINE MECHANICAL (G16 ENGINE)
D Tighten bolts of exhaust pipes to specified torque.
Tightening Torque
.
(a): 50 N m (5.0 kg-m, 36.5 lb-ft)
D Tighten transmission stiffener bolts (right side) to specified
torque (A/T).
Tightening Torque
.
(a): 50 N m (5.0 kg-m, 36.5 lb-ft)
6) Adjust water pump drive belt tension, referring to "ENGINE
COOLING" section.
7) Adjust power steering pump belt tension or A/C compressor
belt tension, if equipped. Refer to section 0B.
8) Adjust accelerator cable play and A/T throttle cable (for A/T)
play. Refer to section 6E1.
9) Check to ensure that all removed parts are back in place. Rein-
stall any necessary parts which have not been reinstalled.
10) Refill engine with engine oil, referring to item "ENGINE OIL
CHANGE" in section 0B.
11) Refill cooling system referring to "ENGINE COOLING" section.
12) Verify that there is no fuel leakage, coolant leakage and ex-
haust gas leakage at each connection.