Suzuki 2000 Grand Vitara SQ625 Service Manual page 305

6) Reverse removal procedure for installation, as previously out-
lined.
7) Adjust water pump drive belt tension, referring to section 0B.
8) Adjust power steering pump belt tension or A/C compressor
belt tension, if equipped. Refer to section 0B.
9) Adjust intake and exhaust valve lashes as previously outlined.
10) Adjust accelerator cable play and A/T throttle cable (for 4 A/T
model) play. Refer to section 6E1.
11) Check to ensure that all removed parts are back in place. Rein-
stall any necessary parts which have not been reinstalled.
12) Refill engine with engine oil, referring to item "ENGINE OIL
CHANGE" in section 0B.
13) Refill cooling system referring to "ENGINE COOLING" section.
14) Refill front differential housing with gear oil, referring to "DIF-
FERENTIAL" section.
15) Connect negative cable at battery.
16) Verify that there is no fuel leakage, coolant leakage, oil leakage
and exhaust gas leakage at each connection.
17) Verify that ignition timing is within specification referring to
"IGNITION SYSTEM (FOR G16 ENGINE)" section.
ENGINE MECHANICAL (G16 ENGINE) 6A1-63