Suzuki 2000 Grand Vitara SQ625 Service Manual page 276

6A1-34 ENGINE MECHANICAL (G16 ENGINE)
EX
1. Rocker arm (IN)
2. Clip
3. Rocker arm shaft
1. Rocker arm shaft bolt
2. Rocker arm shaft
1. Rocker arm shaft
2. O-ring
1. Rocker arm (EX)
2. Rocker arm spring
IN
1. Adjusting screw
2. Rocker arm
3. Cam-riding face
11) Remove intake rocker arm with clip from rocker arm shaft.
NOTE:
Do not bend clip when removing intake rocker arm.
12) Remove rocker arm shaft bolts.
13) Push off rocker arm shaft end to CMP sensor case side and re-
move O-ring from shaft.
14) Remove exhaust rocker arms and rocker arm spring by pulling
rocker arm shaft to front side.
INSPECTION
Adjusting Screw and Rocker Arm
If tip of adjusting screw is badly worn, replace it.
Rocker arm must be replaced if its cam-riding face is badly worn.