6A4-36 ENGINE MECHANICAL (J20 ENGINE)
1. Plunger
2. Latch
3. Body
4. Stopper
1. Timing chain tensioner adjuster No.1
2. Timing chain tensioner
3. Stopper
1. Match mark on idler sprocket
2. Dark blue plate
3. Match mark on crank timing sprocket
4. Yellow plate
1. Timing chain guide No.1
2. Guide bolts
8) With latch of tensioner adjuster No.1 returned and plunger
pushed back into body, hold it at the position by inserting stop-
per between latch and body.
9) Install timing chain tensioner adjuster No.1.
Tightening Torque
.
(a): 11 N
m (1.1 kg-m, 8.0 lb-ft)
10) Pull out stopper from adjuster No.1.
11) Install timing chain guide No.1.
Tightening Torque
.
(a): 9 N
m (0.9 kg-m, 6.5 lb-ft)
12) Check that dark blue and yellow plate of 1st timing chain are
in match with match marks on sprockets respectively.