Suzuki 2000 Grand Vitara SQ625 Service Manual page 309

INSTALLATION
1) Lower engine assembly into engine compartment and connect
engine to transmission.
Hand-tighten bolts and nuts fastening cylinder block and trans-
mission.
2) Tighten engine mounting bracket nuts (R & L).
Tightening Torque
.
(a): 50 N m (5.0 kg-m, 36.5 lb-ft)
3) Tighten bolts fastening cylinder block and transmission to speci-
fied torque.
Tightening Torque
.
(a): 85 N m (8.5 kg-m, 61.5 lb-ft)
4) Remove lifting device.
5) Reverse removal procedure for installation, noting the following.
D Tighten torque converter bolts to specified torque (A/T).
Tightening Torque
.
(a): 65 N m (6.5 kg-m, 47.0 lb-ft)
D Tighten nuts fastening cylinder block and transmission to spe-
cified torque.
Tightening Torque
.
(b): 85 N m (8.5 kg-m, 61.5 lb-ft)
ENGINE MECHANICAL (G16 ENGINE) 6A1-67