6A1-22 ENGINE MECHANICAL (G16 ENGINE)
9) Install radiator fan shroud, water pump pulley, cooling fan and
water pump drive belt.
Adjust water pump drive belt tension, referring to "ENGINE
COOLING" section.
10) Install power steering pump belt or A/C compressor belt, if
equipped.
Adjust its belt tension, referring to section 0B.
11) Connect radiator inlet hose to radiator.
12) Refill cooling system, referring to "ENGINE COOLING" sec-
tion.
13) Connect negative cable to battery.
14) Verify that there is no coolant leakage at hose connection.