Suzuki 2000 Grand Vitara SQ625 Service Manual page 432

1. Exhaust No.1 pipe
1. Exhaust manifold
2. Exhaust manifold
gasket
1. Exhaust manifold gasket
1. Exhaust No.1 pipe
5) Remove exhaust pipe bolts or nuts and exhaust pipe bracket
bolt (if equipped).
6) Remove exhaust manifold and its gasket from cylinder head.
INSTALLATION
1) Install new gasket to cylinder head.
2) Install exhaust manifold.
Tighten manifold bolts and nuts to specified torque.
3) Install seal ring and install exhaust No.1 pipe to exhaust man-
ifold.
Before installing seal ring, check it for deterioration or damage,
and replace as necessary. Use new lock nuts if used.
Tighten pipe fasteners to specified torque.
Tightening Torque
.
(a): 50 N m (5.0 kg-m, 36.5 lb-ft)
ENGINE MECHANICAL (J20 ENGINE) 6A4-13