1. Exhaust manifold gasket
(a)
(a)
INSTALLATION
1) Install new gasket to cylinder head.
2) Install exhaust manifold and stiffener (if equipped).
3) Install pipe gasket and install exhaust pipe to exhaust manifold.
4) Install upper cover to exhaust manifold.
5) Connect heated oxygen sensor-1 connector and fit connector to
6) Connect negative cable at battery.
1. Heated oxygen
sensor-1 connector
2. Bracket
3. Engine hook
Tighten bolts and nuts to specified torque.
Before installing pipe gasket, check it for deterioration or dam-
age, and replace as necessary. Use new lock nuts if used.
Tighten pipe fasteners to specified torque.
Tightening Torque
.
(a): 50 N
m (5.0 kg-m, 36.5 lb-ft)
bracket.
Check exhaust system for exhaust gas leakage.
ENGINE MECHANICAL (G16 ENGINE) 6A1-17